Port Sizes: 1" Air x 1" Water
Port Type: Straight - 180 Degree
Fixed Orifice
Silicone Injection Option
Projection From Tub Wall: 3-3/16"
Hole Saw Size: 1-1/16" (42mm)

The Fixed Orifice Option May be Used With Any Jet Body Length and Any Tub Wall Thickness

Our Silicone Injection option allows for a quick and clean installation of the jet venturi requiring just a tube of silicone and a standard silicone gun. The Silicone Injection option ensures a water-tight seal and reduces the amount of silicone used and time spent cleaning silicone from the around the orifice. All of NuWhirl's Silicone Injection parts include a rubber gasket to ensure a tight fit.

DIRECTIONS:
After attaching the venturi and jet body to a dry tub, simply place the silicone gun in an open port. Squeeze the gun until a small bead of silicone appears on the opposite port. That's it! The jet is sealed.

Silicone Injection Installation Instructions