Dimensions: 2-3/16” W x 3-5/8” L x 3/8” Thick
Cord: 6’ cable w/DIN Connector for Attachment to CIMC

WATER / TEMPERATURE SENSING
When water is sensed by the circuit for 5 continuous seconds the display will show the water temperature and the
“Jets” icon button will become active. The button will remain active as long as water is sensed. If water is not
sensed for more than 2 seconds continuously, the “Jets” icon button will become inactive, the display will indicate
“No H2O”, and the blower will turn off.

SCALDING ALARM
If the temperature of the detected water exceeds 111 degrees Fahrenheit, “TOO HOT” will flash on the display
and the “Jets” icon button will be de-activated. If the over-temperature is detected while the blower is functioning,
then the blower will turn off. Once the temperature no longer exceeds the high limit, the system will allow
the blower to be re-started.

Download Water/Temp Sensor Sell Sheet